Single Panel Wallpieces

For smaller spaces and smaller budgets than our one-of-a-kind constructed wallpieces, we make several styles of single-panel wallpieces. They allow us to experiment with patinas and with other techniques, and to create simpler pieces on a smaller scale. We try to keep a few of each style available at any given time; normally, any you see on this page will be available, but please contact us to check.

Scrap Wallpieces
When making wallpiece parts out of small pieces of brass scrap, corners of the sheet of assembled scrap are cut out (to enable the part to be folded into a pan) and discarded. Those 'scrap scraps' which have inherent visual interest are kept, and some are incorporated into scrap wallpieces. The scrap part is mounted on screws and attached to the front of a single patinaed wallpiece pan. The scrap is sometimes patinaed a contrasting color from its back piece; other times it is flame-oxidized or polished. Some of the scrap wallpieces are made to hang in any direction, but often the pans were not originally built with this in mind, so some only have one or two orientations in which they can easily be hung. Retail prices shown
Scrap wallpiece 09.02 13×23 inches $510
Scrap wallpiece 09.01 7×21 inches $300
Scrap wallpiece 08.20 14×21 inches $280
Scrap wallpiece 08.19 8×21 inches $320
Scrap wallpiece 08.18 11×13½ inches $260
Scrap wallpiece 08.12 11×30 inches $440
Scrap wallpiece 08.11 3×7 inches $160
Scrap wallpiece 08.03 5×9 inches $200
Click here for more images of older (mostly sold) scrap wallpieces

Small Face Wallpieces
Since 2006, David has been making repoussé faces in copper. Most of these are larger, and incorporated into our constructed wallpieces, but some are made small, and placed on small single panels, in the manner of scrap wallpieces (above). Every face is made freehand, and is therefore unique. Retail prices shown
Small Face Wallpiece 0701 4×17 inches [Sold]
Small Face Wallpiece 1 "Duuude" (2006) ?? × ?? inches [Sold]
Click here for more images of older (mostly sold) single-panel small face wallpieces

Collision Wallpieces
In April 2008 we started making a new, collaborative style of single-panel wallpieces, which are formed by one of us heating the surface of the large panel while the other tears the surface open with cold chisels and hammers. The rip is expanded and adjusted until it fits the smaller piece, with the appearance of the smaller piece colliding with and bursting through the larger. Retail prices shown
Collision Wallpiece 6 (2008) - 2 views 6×8; inches $620
Collision Wallpiece 5 (2008) - 3 views 7×20; inches $1050
Collision Wallpiece 4 (2008) - 3 views 10×25; inches $1260
Collision Wallpiece 3 (2008) 10×17½ inches [Sold]
Collision Wallpiece 2 (2008) 13×14½ inches $640 [Showing at Mowen Solinsky Gallery]
Collision Wallpiece 1 (2008) 11×12 inches $420 [Showing at Mowen Solinsky Gallery]

1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009
Modular wallpieces	Disc wall hangings	Wall fountains	Reed's wallpieces

Single Panel Wallpieces

Scrap Wallpieces

Small Face Wallpieces

Collision Wallpieces